Liquid Dropper Bottles

Liquid Dropper Bottles is the round bottles with bulb rubber, which is a translucent plastic or glass barrel combine to make a dropper. The dropper is marked or no marking.

The features of Liquid Dropper Bottles:

Function: These bottles include a dropper insert (removable for re-filling, or for packaging more viscous solutions or powders) and cap. Use this plastic pipetteglass dropper, with a rubber squeeze bulb to drop small amounts of liquid wherever you think they should go.

Bottles: The bottles accept permanent ink well - we recommend felt tip "Sharpie" brand pens for writing on the bottles (noting that alcohol based solutions will still wash off the ink).

Possible uses include:These are pharmaceutical grade dropper bottles ideally suited for repackaging your sundries.

Aqua Mira
DEET
Liquid or powder soaps
Tooth powder or toothpaste
Skin lubricants, Vaseline, sunscreen, lip balm
Purell and other alcohol hand sanitizers
Liquid medications, including eyedrops and contact lens solution (these are pharma/food grade bottles)
Tabasco Sauce and other condiments (these are pharma/food grade bottles)
Metering precise amounts of alcohol fuel for alcohol stoves (one full bottle = approximately 0.2 oz of denatured alcohol)

Specifications:

Capacity: 8 mL capacity (0.25 oz of water). If you were to repackage your AquaMira solutions into these bottles, a 2-bottle set might give you enough solution to treat about 20 liters of water (see information below under "Drop Size" regarding AquaMira dosing with these bottles), and collectively weigh 1 oz (as compared to a full Aqua Mira set, which weighs more than 3 oz). Thus, we recommend the smaller bottles for shorter trips, or as a backup when a filter is your primary means of water treatment.

Material: These bottles are opaque to prevent reaction of solutions with UV light resulting from sun exposure, which can reduce the efficacy of some chemicals, including AquaMira, Bleach, DEET, antimicrobial soaps, and others. The plastic material is a high density polyethyelene, does not leach plasticizers into your solutions (these are food- and pharma-grade bottles), does not react with AquaMira, DEET, alcohol, or any water or soap-based solutions, and most importantly, are very light!

Drop Size Comments: Please be aware that drop sizes for any bottle are going to be dependent upon two factors: the viscosity of the fluid being dispensed and the design of the dropper tip.

Other Names of Liquid Dropper Bottles:

Liquid dropper, amber dropper bottles, medicine dropper

Manufacturer or Supplier of Product:

China Suncity Plastic Vials Factory

Relative Site (URL):

http://www.china-vials.com